Loading...
Serving Burlingame, CA and surrounding areas. (650) 582-0659
Add a fence that defines your property and holds up to Burlingame salt air. We install powder-coated ornamental iron with permits handled, HOA guidance included, and a finish built for the Peninsula climate.
Ornamental iron fence installation in Burlingame, CA involves setting steel or wrought-iron posts in concrete, attaching prefabricated or custom panels, and finishing all cut points with a rust-inhibiting primer before the final powder coat - most residential projects are completed in one to three days once permits are approved.
An ornamental iron fence does two things at once: it defines your property line with a clean, finished look, and it delivers real durability that wood and vinyl cannot match. In Burlingame, where homes often date back to the 1920s and curb appeal is tied to real money, the right fence is not just a boundary - it is part of the home. If you also want a gate that opens automatically, our security fence installation and custom fence design services can be combined with ornamental iron in a single project.
Every project starts with a free on-site estimate. We walk your property line, measure the fence run, review your HOA rules if applicable, and confirm the permit requirements for your specific yard location. The written proposal we give you covers materials, labor, permit fees, and gate work - with no line items added later.
If your existing fence leans noticeably, has sections that rattle when pushed, or shows large rust patches that go through the metal rather than sitting on the surface, it has likely reached the end of its life. Patching a fence in this condition costs money without solving the underlying problem. A full replacement gives you a fresh start with properly installed, well-protected ironwork.
If you have an ornamental iron fence that is only five or ten years old but already showing widespread rust, the likely cause is a coating not suited for Burlingame's coastal fog and salt air. This is a common outcome when contractors use standard paint rather than a marine-grade or powder-coated finish. Replacement with a properly finished fence is usually more cost-effective than repeated touch-ups.
If your front or side yard has no fence, you may be noticing more foot traffic cutting through, or simply feeling that your home lacks the finished, defined look neighboring properties have. Burlingame's older neighborhoods were often built without fencing, and many homeowners add ornamental iron as part of a broader curb appeal update.
Burlingame home values are among the highest in San Mateo County, and buyers at this price point notice details. A well-designed ornamental iron fence frames the front of a home and signals that the property has been cared for. If your current fence is dated, damaged, or the wrong style, replacing it before listing can make a meaningful difference in first impressions.
We install standard panel ornamental iron fences as well as fully custom designs. Standard panel systems use prefabricated sections in classic vertical-bar, spear-top, or flat-top profiles - they install faster and cost less than custom work, and they suit most Burlingame residential lots well. For homes where the architecture calls for something specific - curved sections, decorative scrollwork, a design that matches an existing gate or railing - we fabricate custom panels to your exact specifications. If you want the look of ornamental iron but need more complete coverage, our security fence installation service can incorporate iron panels with added security features.
Gates are available in single-swing, double-swing, and sliding configurations. Every gate we build includes heavy-duty hinges, a self-latching mechanism, and a diagonal brace welded into the frame to prevent sagging over time - details that separate a gate that still opens smoothly in ten years from one that droops within two. For properties that want a complete exterior overhaul, our custom fence design service can tie the fence, gate, and any other ironwork together into a single cohesive design.
The most cost-effective entry point - classic vertical-bar or spear-top profiles that suit most Burlingame residential lots and install in one to two days.
Built to your specifications - scrollwork, unique profiles, or designs that match existing architectural details on your home.
The standard choice for pedestrian and driveway openings with enough clearance for the gate arc - includes heavy-duty hinges and a diagonal anti-sag brace.
The right fit for sloped driveways or tight openings where a swing gate cannot arc clear - available in the same ornamental iron finish as the fence panels.
The single biggest factor separating a successful ornamental iron fence in Burlingame from one that fails early is the finish. Burlingame sits close to San Francisco Bay, and the marine layer that rolls in most mornings brings moisture and salt that are genuinely hard on metal. A fence finished with standard paint in this environment will show rust spots within a few years. The correct approach is a factory-applied or field-applied powder coat - a baked-on finish that is rated for coastal and high-humidity conditions. Every fence we install uses a powder coat finish, and we touch up every cut point and weld made on-site with rust-inhibiting primer before we consider the job done. Homeowners in Millbrae face the same Bay-side corrosion conditions, and we approach every Peninsula job with that reality in mind.
Burlingame's large stock of homes built between the 1920s and 1960s means property lines are not always where owners assume they are. Surveys from that era are sometimes imprecise, and a fence installed even a few inches onto a neighbor's property can become a costly dispute. We raise the property line question at the first site visit - before we design anything. Burlingame also has permit requirements that vary by fence location on the lot, and many neighborhoods have HOA rules that restrict height, color, or style. Homeowners in San Mateo deal with similar HOA considerations, and our team is familiar with navigating both city permit offices and association review processes across the Peninsula.
We ask a few questions upfront - fence length, style preferences, HOA status - then schedule a free on-site visit. We reply within one business day. The site visit is the only way to price the job accurately.
We walk your property line, measure the run, and discuss height, panel style, and gate options. You receive a written quote covering all costs - materials, labor, permit fees, and any gate hardware - before any work is scheduled.
We submit the permit application to the City of Burlingame Building Division on your behalf. Most residential permits are reviewed within one to three weeks. You do not need to contact the city - we handle the paperwork and keep you updated on status.
Once the permit is approved, the crew arrives with panels, posts, and hardware measured to your job. Most residential fences install in one to two days. We then coordinate the required city inspection and are present for it - any adjustments requested by the inspector are on us, not on you.
Free on-site estimate. We handle the Burlingame permit and city inspection from start to finish.
(650) 582-0659We use finishes specifically suited for the Bay Area's salt air and fog - not the standard paint that fails within a few years near the water. Every cut and weld made on-site is touched up with rust-inhibiting primer before we leave the job.
We pull the permit, manage the city review timeline, and are present for the final inspection. If the inspector requests any adjustment, we handle it - you never have to call the Burlingame Building Division yourself. Unpermitted fences create problems at resale, and we make sure yours is fully documented.
Many Burlingame neighborhoods have HOA design guidelines that restrict fence height, color, or style. We ask about your HOA before designing anything, and we know what documentation associations in this area typically require. You will not fall in love with a design your HOA rejects.
Any contractor doing work valued at $500 or more in California must hold a valid state license - you can verify ours on the California Contractors State License Board website at any time. We carry full liability insurance and workers compensation, and we have completed permitted fence projects across Burlingame and the surrounding Peninsula. See the{" "}American Fence Association{" "} for industry standards we work to.
When you hire Elite Burlingame Fence, you get a contractor who knows the City of Burlingame permit process, understands what the Bay Area climate does to metal, and builds fences meant to last decades - not just pass a first inspection.
Add height and anti-climb features to your perimeter - steel, aluminum, or chain-link options designed to raise the barrier without sacrificing appearance.
Learn MoreWork with us on a fence design tailored to your home's architecture - scrollwork, unique panel profiles, or a fully custom gate to match.
Learn MorePermits, HOA guidance, and a finish built for Burlingame's coastal air - call now or request an estimate online and we will get back to you within one business day.