Loading...
Serving Burlingame, CA and surrounding areas. (650) 582-0659
When patching is no longer worth it, we remove your old fence completely and install a new one using materials chosen for Bay Area moisture - with permits handled, property lines confirmed, and no surprise costs.
Fence replacement in Burlingame, CA means removing the old fence completely - posts, panels, and all hardware - and installing a brand-new structure from the ground up; most residential jobs take one to three days of installation once permits are in hand, and the result is a fence that holds up for 15 to 20 years with basic maintenance.
The honest answer to "repair or replace" usually comes down to the posts. If the posts are rotting, leaning, or set in deteriorated concrete, patching the boards on top of them just delays the inevitable. Burlingame's coastal fog and wet winters accelerate post rot faster than most homeowners expect - especially on older properties where the posts were not treated for moisture when they were first installed. If your fence has been patched multiple times and still looks rough, the posts are likely the reason. We will check them during the free estimate visit and tell you directly what we find. For fences where the structure is sound but the surface looks worn, combining targeted fence repair with fresh staining can extend the life of the fence by several more years before replacement becomes necessary.
Material choice matters more in Burlingame than in drier inland cities. Untreated pine rots quickly in this climate. Redwood and cedar are the traditional local choices because they resist moisture naturally. Composite, vinyl, and aluminum last even longer with almost no maintenance, though they look different from wood. We can walk you through the trade-offs for your specific yard, budget, and neighborhood during the estimate.
If sections of your fence are visibly leaning - even slightly - the posts are likely failing at the base. This is one of the clearest signs that repair is no longer enough. A leaning fence will not straighten itself, and the longer you wait, the more likely it is to fall during a storm or a strong wind event.
Press your thumb against the base of a fence board or post. If the wood feels soft or crumbles, rot has set in - often driven by Burlingame's regular coastal fog and wet winters. Rot spreads, so a fence that looks mostly fine from a distance may be structurally compromised at the base. Once rot reaches the posts, replacement is almost always more cost-effective than continued repair.
A fence that has had boards replaced here and there over the years often ends up with different wood tones, different heights, and inconsistent gaps. Beyond the appearance, repeated patching usually signals that the underlying structure is aging out. If you are spending more time and money patching than maintaining, starting fresh is the better long-term investment.
Gaps between boards that have warped or shrunk, sections that have dropped in height, or gates that no longer latch properly all mean your fence is not doing its job. In Burlingame where lots are close together, a fence that has lost its privacy function is a real quality-of-life issue - not just a cosmetic one.
We replace fences in wood, vinyl, aluminum, composite, and chain-link, and we can match or upgrade from whatever material your old fence used. Wood is the most common choice in Burlingame's residential neighborhoods because it fits the character of older homes and can be stained or painted to match your property. For homeowners who want low maintenance after replacement, vinyl and aluminum are worth serious consideration - they do not rot, do not rust, and require almost no annual upkeep. Composite fencing is a middle option: it looks like wood but handles moisture better than untreated lumber, which makes it well-suited to the Bay Area's persistently damp climate.
Every replacement job starts with demolition and full haul-away of the old fence - posts, panels, concrete footings, and hardware. New posts are set in fresh concrete and allowed to cure before panels go up. Gates are available in single swing, double swing, and sliding configurations with self-latching hardware. If your property needs a specific style to match an existing structure or meet an HOA requirement, we offer wood fence installation in a range of board styles and heights. For properties needing a higher level of access control alongside the new fence, fence repair for adjacent sections that are still sound can be combined into the same project to keep costs efficient.
The most popular choice in Burlingame - redwood and cedar are recommended for their natural resistance to the Bay Area's moisture and fog.
No painting, no staining, no rot - suited to homeowners who want a clean look without ongoing maintenance in a wet climate.
Durable, corrosion-resistant, and low-profile - a strong option for yards where visibility is preferred over full privacy.
Looks like wood, handles moisture better - a good middle ground for homeowners who want the wood aesthetic with fewer maintenance demands.
Burlingame's housing stock is older than most Bay Area cities - a large share of homes were built between the 1920s and 1960s. When a contractor removes a fence on one of these older properties, they sometimes find that the posts have been sitting in deteriorated concrete, or that the fence line has drifted from the actual property boundary over decades. We verify property lines before any post is set, and we assess what is actually in the ground before we quote. Sloped lots in Burlingame's hillside neighborhoods add another layer of complexity - fencing on a slope requires racking or stepping techniques, and that additional labor shows up in an honest quote. Homeowners in San Mateo face similar older-housing and slope challenges, and we apply the same site-assessment standards there.
The City of Burlingame requires a building permit for fences over six feet tall, and there are setback rules that govern how close a fence can sit to the street or a neighboring property. We handle permit applications for projects that require them and coordinate with the city on your behalf so you are not chasing paperwork. HOA requirements are a separate layer - many neighborhoods in Burlingame's Easton Addition and hillside areas have design guidelines that govern fence material, height, and color. We have helped homeowners work through HOA pre-approval before work begins, which avoids the costly situation of building a fence you are then required to tear out. Homeowners in Belmont navigate similar permit and HOA steps, and the same process applies. The American Fence Association provides industry standards for installation quality and contractor accountability that we reference on every project.
We come out to measure your fence line, assess the condition of the existing posts, and note any slope or access challenges before giving you a written quote. Most estimate visits take 20 to 45 minutes. We reply to all requests within one business day.
If your fence height requires a city permit, we handle the application. Plan for one to three weeks of review time before work can begin. We will not start work before the permit is approved - skipping permits can create problems when you sell your home.
The crew removes your old fence - posts, panels, and hardware - and hauls it away. This is the noisiest part of the job and usually happens on the first morning. If old posts were set in concrete, removing them takes more time, which we factor into our quote.
New posts are set in concrete and allowed to cure before the panels go up. Gates, latches, and any finish work follow. We do a final walkthrough with you before we leave to check that everything is level, plumb, and operating correctly.
Free estimate, no obligation. We handle permits, confirm property lines, and haul away the old fence - you just approve the quote.
(650) 582-0659Installing a fence even a few inches over a property line can lead to disputes, required removal, and real cost. We confirm your boundary before a single post goes in - so you are not dealing with a neighbor complaint or forced removal after the work is done.
Burlingame's marine air accelerates rot in untreated wood and rust in low-quality hardware. We specify rot-resistant species and corrosion-resistant hardware on every wood job, and we do not use materials that look fine at installation but fail within a few years of fog-season exposure.
Burlingame has specific height and setback rules for fences, and skipping a required permit can cost you far more later - especially at resale. We manage the permit application, coordinate with the city, and make sure your new fence is built to code. No shortcuts that become your problem later.
Many Burlingame properties fall within HOA guidelines for fence height, material, and color. We have helped homeowners navigate pre-approval before work begins so the finished fence satisfies both the homeowner and the association. Verify with the{' '}City of Burlingame Building Division whether your project also requires a city permit alongside HOA approval.
Every one of these points directly affects the outcome of your fence replacement - not just during installation, but for the years that follow. Call us or use the form above and we will set up a free site visit within a few days.
Permit requirements are outlined by the City of Burlingame Building Division. California shared fence rules are covered under California Civil Code Section 841. Verify your contractor license at the California Contractors State License Board before signing any contract.
New wood fence installation from the ground up - board styles, heights, and species options suited to Burlingame's climate.
Learn MoreIf sections are still structurally sound, targeted repair can extend the life of your fence before full replacement is needed.
Learn MorePermit-savvy crews ready to start - most projects are underway within two weeks of city approval. Call now to lock in your timeline.