Loading...
Serving Burlingame, CA and surrounding areas. (650) 582-0659
Stop getting out of your car in the rain. We install automatic gates built for Burlingame's coastal climate - swing and slide systems with remote, keypad, or app entry that close behind you every time.
Automatic gate installation in Burlingame, CA includes the gate structure, motor, control board, entry system (keypad, remote, or app), and safety sensors - most single-family residential installations are completed in one to two days, including permit coordination with the City of Burlingame Building Division.
An automatic gate does more than add convenience. In Burlingame, where some residential streets see more through-traffic than you might expect from a quiet suburb, a gate that closes behind every vehicle is a meaningful security and safety upgrade. Whether you are adding a gate to a new fence or upgrading an existing manual gate, the system needs to be sized, wired, and programmed correctly from the start. If you are thinking about how the gate fits into a larger perimeter plan, our ornamental iron fence installation and security fence installation services pair well with an automatic gate.
Every automatic gate project starts with an on-site visit. We measure the opening, check the driveway slope, and look at where electrical power is available before we recommend a gate type or motor. That site visit is free, and the written proposal we give you afterward includes everything - gate, motor, entry system, permit, and any electrical work - so there are no surprises.
If your property has no gate and you have noticed more foot traffic, package theft, or strangers cutting through your driveway, a gate would improve your daily sense of security. Burlingame's mix of residential and commercial streets means some neighborhoods see more through-traffic than expected.
If you are getting out of your car every time you come home to push open a heavy gate - especially in the rain and fog Burlingame gets from October through April - that friction adds up. An automatic system means you never leave your car in wet weather, and the gate closes behind you every time.
Burlingame's marine air is hard on metal. Visible rust streaks, a hinge pulling away from the post, or a motor that sounds like it is working too hard are signs the system is failing. A gate that moves unevenly or stops mid-cycle is also a safety concern - sensors or the motor are no longer functioning as designed.
If your driveway connects directly to the street and you have kids or dogs who could wander out, a gate that closes automatically behind every vehicle is a meaningful safety upgrade. This is especially relevant on Burlingame's busier residential streets where traffic moves faster than it looks.
We install both swing and slide automatic gate systems for residential and light commercial properties. Swing gates are the more common choice for standard residential driveways with enough clearance to arc open. Sliding gates are a better fit when the driveway is on a slope or when there is not enough flat space in front of the opening for a swing gate to clear. Both systems can be paired with any entry method - remote, keypad, video intercom, or smartphone app. For properties that also need a complete perimeter solution, our ornamental iron fence installation integrates naturally with a swing or slide gate in the same material and finish.
Every installation includes safety sensors that detect an obstacle in the gate's path and stop or reverse movement before it causes harm. Battery backup is included so the gate continues to function during a power outage - a practical consideration on the Peninsula where winter storms occasionally knock out power. For properties that need a higher level of access control alongside the gate, security fence installation can be combined with the gate system in a single project.
Best for standard residential driveways with flat approach and enough clearance - the most common configuration for Burlingame homes.
The right choice for sloped driveways or tight openings where a swing gate would not have room to arc open safely.
Suits homeowners who want simple, reliable entry without a phone app - remotes for vehicles, a keypad at the gate for guests.
A good fit for households that want to see and speak to visitors before opening the gate, or open the gate remotely from inside the house or away from home.
Two things about Burlingame affect automatic gate installation more than homeowners typically expect. First, the climate: the marine layer and salt air that roll in off San Francisco Bay are hard on bare metal and electronic components. A gate system installed without corrosion-resistant materials - powder-coated aluminum, galvanized steel hardware, properly sealed motor housing - will show rust and begin to fail within a couple of years in this environment. Second, Burlingame's older neighborhoods have mature trees along many driveways. Root systems can complicate post-setting and underground conduit work, and Burlingame's urban tree canopy policies may protect certain trees from root disturbance. Experienced local installers plan for both before they start digging. Homeowners in Foster City and San Mateo face similar considerations, and we apply the same careful approach across every job on the Peninsula.
The San Francisco Peninsula also sits in one of the most seismically active regions in the country. Gate posts set in shallow footings can shift after even a moderate earthquake, throwing the gate out of alignment or making it impossible to open. We calculate footing depth based on both soil conditions and local seismic risk - not just what is standard in a drier, lower-risk part of the state. That detail separates a gate that stays true for fifteen years from one that needs realignment after the first significant tremor.
We reply within one business day. We will ask about your driveway width, whether you have an existing gate or fence, and what you want the gate to do for you. We show up to the site visit with the right ideas already in mind - not starting from scratch.
We measure the opening, check the driveway slope, look at where power is available, and flag any root systems or underground concerns. Within a few days you will receive a written proposal that breaks out gate type, motor, entry system, and permit costs as separate line items - so you see exactly what you are paying for.
For most Burlingame installations involving electrical work or new footings, we pull the permit on your behalf. City processing typically takes one to three weeks. We build this into your project schedule from the start so the timeline is predictable.
The crew sets posts, mounts the gate, wires the motor, and installs entry controls. Before leaving, we program your remotes or keypads, walk you through the system, and test safety sensors by placing an object in the gate's path to confirm it stops and reverses. We do not rush this step.
Free on-site estimates. Written quotes covering everything - gate, motor, entry system, and permits. No hidden line items.
(650) 582-0659We specify powder-coated aluminum, galvanized steel hardware, and properly sealed motor housings on every coastal installation. In Burlingame's salt air environment, bare metal gates fail faster than homeowners expect - and we treat corrosion protection as standard, not an upgrade.
The San Francisco Peninsula sits in a high seismic zone. We calculate footing depth based on local soil conditions and seismic risk so gate posts stay true after ground movement - not just after installation. A gate that goes out of alignment after a moderate earthquake is a gate that was not installed for where it actually lives.
Burlingame requires a permit for most automatic gate installations that involve electrical work or new footings. We handle the application, coordinate the city inspection, and give you a copy of the approved permit to keep with your home records - useful documentation when you sell the property.
Every properly installed automatic gate must include sensors that stop or reverse the gate when an obstacle is detected. We test sensors on every job by placing an object in the gate's path before we consider the installation complete. The DASMA safety standard requires this, and we treat it as non-negotiable.
An automatic gate is a mechanical system that needs to be right from day one. Every installation we complete ends with a full walkthrough - system operation, manual release location, entry code setup, and sensor confirmation - so you know exactly how your gate works before we pull out of the driveway.
Pair your automatic gate with a matching ornamental iron perimeter fence for a cohesive, high-curb-appeal finish.
Learn MoreCombine controlled gate entry with a purpose-built security fence for a complete access management system.
Learn MorePermit season books up quickly - call now or request a free on-site estimate online and lock in your installation date before the spring rush.